Description
LINOVISION Mini Passive 2 Port POE Extender – Features & Prices in Saudi Arabia :
LINOVISION Mini Passive 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP
Product Dimensions
3.1 x 2 x 0.9 inches
Item Weight
2.01 ounces
Manufacturer
LINOVISION
ASIN
B07HSN5YSK
Country of Origin
China
Item model number
POE-Extender02
Is Discontinued By Manufacturer
No
Date First Available
September 28, 2018
Test video – LINOVISION Mini Passive 2 Port POE Extender :
Product highlights :
Questions & Answers – LINOVISION Mini Passive 2 Port POE Extender :
Technical specifications – LINOVISION Mini Passive 2 Port POE Extender :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
P. E (verified owner) –
It works. Good for systems that don’t have availible LAN connections or POE switch ports are full – My POE switch has only one port available and total power wise its running 50% below max. Tested it with two Hikvision fixed lens cameras that pulled about 5 watts each. Power cycled, about six separate times, the POE LAN port that is connected to the IN on this unit (PoE Extender02), every time the NVR system reconnected both cameras without a problem. Didn’t try to replicate rookie mistakes of running at max spec for this unit as it always is safe and saves time to run under specs, why? cause functionality is always the premium.
I. T (verified owner) –
great product – just complete and installation, one camera per floor, the customer want to add more cameras, 9 floor, did my research and found these, i did not need to run additional wires, just connect the camera and program it and walla.. got video to the othe direction.
K. Z (verified owner) –
It Works! – I needed to add a second POE camera in a location where I already had one. I really didn’t want to run another Ethernet cable, so I purchased this to run both POE cameras off the one cable and it works! I was so happy that the POE could power this switch along with both cameras. Not only that, but there is about 150-200′ of CAT5e cable between the primary POE switch and this switch – and it still works! Couldn’t be happier.
Z. R (verified owner) –
Cheap quality but usually work – Ordered two units, one was DOA. Other one works to power two ip cameras, but after a day both went offline. Had to reset Poe switch. Went offline again a day later.
C. B (verified owner) –
Works as Described – This is a fantastic product, easy installation and well worth time and savings of not having to install a new wire all the way back to the switch room. I used this to add an IP Camera out in the field and jumped off an existing camera out there, saved a lot of time and money. Thanks
P. O (verified owner) –
Less than 8 watts per port output! – I tried this POE extender with a 500W Ubiquiti 24 port managed POE switch.
C. B (verified owner) –
Works as Described – This is a fantastic product, easy installation and well worth time and savings of not having to install a new wire all the way back to the switch room. I used this to add an IP Camera out in the field and jumped off an existing camera out there, saved a lot of time and money. Thanks
Z. R (verified owner) –
Cheap quality but usually work – Ordered two units, one was DOA. Other one works to power two ip cameras, but after a day both went offline. Had to reset Poe switch. Went offline again a day later.
K. Z (verified owner) –
It Works! – I needed to add a second POE camera in a location where I already had one. I really didn’t want to run another Ethernet cable, so I purchased this to run both POE cameras off the one cable and it works! I was so happy that the POE could power this switch along with both cameras. Not only that, but there is about 150-200′ of CAT5e cable between the primary POE switch and this switch – and it still works! Couldn’t be happier.
P. O (verified owner) –
Less than 8 watts per port output! – I tried this POE extender with a 500W Ubiquiti 24 port managed POE switch.
J. B (verified owner) –
Mount it where you can get to it easily! – This device works as advertised, it will take a single PoE line in and provide two PoE lines out. HOWEVER: make sure you mount this device where you can easily get to it. I have installed two of these units on separate projects, and in the event of power loss, they will not reset properly. Both ports turn on at the same time and neither one will grab an IP address. The only remedy I have found is to unplug one of the cameras, wait about five seconds, then plug it back in. At that point, both cameras will obtain IP addresses again.
P. E (verified owner) –
It works. Good for systems that don’t have availible LAN connections or POE switch ports are full – My POE switch has only one port available and total power wise its running 50% below max. Tested it with two Hikvision fixed lens cameras that pulled about 5 watts each. Power cycled, about six separate times, the POE LAN port that is connected to the IN on this unit (PoE Extender02), every time the NVR system reconnected both cameras without a problem. Didn’t try to replicate rookie mistakes of running at max spec for this unit as it always is safe and saves time to run under specs, why? cause functionality is always the premium.
J. P (verified owner) –
Very Unreliable, Does Not Handle Power Flickering – UPDATE: I have to knock this review down to 2 stars. Why? Because this device does not handle power outages or even a quick power blip very well. I’ve discovered that anytime the power flickers, this device goes offline and will not power the devices attached to it. Only resolution is to manually unplug this device from the POE line and plug it back it. Considering I have this mounted on the 10ft ceiling of my garage, this isn’t going to work! With that said, this is going in the trash because for some reason it does not handle the power flickering.
J. P (verified owner) –
Very Unreliable, Does Not Handle Power Flickering – UPDATE: I have to knock this review down to 2 stars. Why? Because this device does not handle power outages or even a quick power blip very well. I’ve discovered that anytime the power flickers, this device goes offline and will not power the devices attached to it. Only resolution is to manually unplug this device from the POE line and plug it back it. Considering I have this mounted on the 10ft ceiling of my garage, this isn’t going to work! With that said, this is going in the trash because for some reason it does not handle the power flickering.
I. T (verified owner) –
great product – just complete and installation, one camera per floor, the customer want to add more cameras, 9 floor, did my research and found these, i did not need to run additional wires, just connect the camera and program it and walla.. got video to the othe direction.
J. B (verified owner) –
Mount it where you can get to it easily! – This device works as advertised, it will take a single PoE line in and provide two PoE lines out. HOWEVER: make sure you mount this device where you can easily get to it. I have installed two of these units on separate projects, and in the event of power loss, they will not reset properly. Both ports turn on at the same time and neither one will grab an IP address. The only remedy I have found is to unplug one of the cameras, wait about five seconds, then plug it back in. At that point, both cameras will obtain IP addresses again.